Skip to main content

Test Your Badge Kit Before the Event

Upload test badges, scan them in Test Mode in the Popl app, and confirm your badge kit returns the right data before the show.

Overview

Required Subscription: Event Lead Capture

Badge Kit Test Flow lets you confirm your badge kit returns the right data before your event. You upload test badges on the web dashboard, scan them in Test Mode in the Popl app, and see exactly what the kit returns and what your reps will see.

Test scans never create a lead and never use credits, so you can test as often as you like, including the morning of the show.

Before You Start

  • You need to be a Full Team Admin or a Sub-team Admin. Sub-team Admins can test the events they can already access.

  • The event needs a badge kit provider and credentials set up.

  • Get test badges from your show organizer or badge provider, as images or PDFs.

  • You need the Popl app on your phone and an internet connection.


How It Works

Behavior

What It Means

Nothing is saved

Test scans do not create leads, appear on the Leads page, sync to integrations, or send follow-up emails.

No credits used

Test scans run your badge kit and enrichment for real, but they never use credits.

No event assignment needed

You can test an event you are not assigned to, and the event does not need to be active yet. Testing does not add you to the event.

Active and upcoming events only

You can test events that have a badge kit and have not ended.

Your settings save even if they are wrong

Save + Test Badge Kit saves your badge kit either way. The test is how you find out if the credentials work.

Empty fields mean something is wrong

If the kit returns nothing, the fields show empty. This is how bad credentials or a provider problem shows up.

Test badges stay on the event

Any admin with access to the event can open the test later and use the same badges.

Test Mode stays on until you exit

Test Mode stays on if you leave or close the app. Tap the X on the Test Mode banner to exit.


Setting Up the Test

Upload Your Test Badges

  1. On the web dashboard, open the event and go to the badge kit section.

  2. Choose your badge kit provider and enter your credentials.

  3. Click Save + Test Badge Kit. Your badge kit saves and the test opens.

  4. Upload your test badges, one image per badge. If your organizer sent several badges in one file, screenshot each badge separately. You can upload PNG, JPEG, WebP, or PDF files up to 10 MB each, with a maximum of 10 badges.

  5. Click Test Badges.

  6. Read how the test works, then click Scan Badge. Your badges appear one at a time, large enough to scan from your screen. Use the arrows to move between them.

ATS Only: Upload Your Barcode Layout

If your provider is American Trade Show Services (ATS), your badge kit needs the show's barcode layout.

  1. Select American Trade Show Services (ATS) as the provider and enter your password.

  2. In the Barcode Layout section, upload the barcode layout PDF from ATS.

  3. Click Save + Test Badge Kit. The button stays disabled until both the password and the layout are entered.

Note: Popl reads the layout to set which value goes in which field for this event. If your test scans show values in the wrong fields, upload the layout again and re-test. Leads you already captured are not changed.


Scanning in Test Mode

Keep the badge on your laptop screen and pick up your phone.

  1. In the Popl app, go to Settings and tap Test Badge Kit.

  2. Choose the event. The scanner opens with the Test Mode banner at the top.

  3. Scan the badge on your laptop screen.

  4. Check the Scan Result. This is the raw badge kit data, not what your team sees at the event. Confirm the fields match your kit documentation.

  5. Tap See Full Lead to see the lead the way a rep will see it, with enrichment, qualifiers, and your event's fields. You can fill in qualifiers to try them. Nothing is saved.

  6. Tap Rescan Sample Badge, then scan the next badge on your laptop screen.

  7. When you are done, tap the X on the Test Mode banner. Then click Finish Testing on the web dashboard.

Re-Test Before Doors Open

Credentials and badge formats can change between events. To test again, click Test Badge Kit in the event's badge kit section, or open Test Badge Kit in the app's Settings. Your uploaded badges are already there.


What to Expect

After Testing

What You See

Badge kit status

After Finish Testing, the badge kit section shows your kit as connected, with Edit Details and Test Badge Kit.

Where results show

Test results show in the app only. The web dashboard does not show them.

Usage tips

Dismissing the usage tips collapses the badge kit section. Click Show info to bring them back.

Leads and credits

No leads appear on your Leads page, and your credits do not change.


Troubleshooting

Issue

What to Do

Every field on the Scan Result is empty

The kit returned nothing. Check your credentials for typos and extra spaces, click Edit Details to fix them, and test again. If it still fails, contact Popl support before the event.

Values land in the wrong fields (ATS)

Upload the barcode layout PDF again and re-test.

Values land in the wrong fields (other providers)

Contact Popl support before the event.

I do not see Test Badge Kit in the app's Settings

It is available to Full Team Admins and Sub-team Admins on Event Lead Capture. Update the app if you are an admin and still do not see it.

My event is not in the list

Only active and upcoming events with a badge kit appear. Sub-team Admins see only the events they can access.

Test Badges is disabled

Upload at least one test badge.

Save + Test Badge Kit is disabled (ATS)

Enter your password and upload the barcode layout PDF.

My scan does not go through

Test scans need an internet connection. Reconnect and scan again.


FAQ

Question

Answer

Do test scans use credits?

No.

Will test scans sync to my CRM?

No. Test scans never create a lead.

Do I need to be assigned to the event?

No. Testing does not add you to the event.

Can my reps run a test?

No. Testing is for admins only.

Can I test a past event?

No. Only active and upcoming events with a badge kit.

Can another admin use the badges I uploaded?

Yes. Uploaded badges stay on the event.

Can I see results on the web dashboard?

No. Results show in the app only.


💡 Tip

Need more help? Get support from our team

Chat with us or email us at [email protected]

Did this answer your question?