Skip to main content

Logging Popl Activity to Salesforce

Learn how to log a Salesforce Event, Email, or Task each time your team captures a lead, sends a follow-up email, or books a meeting in Popl.

Overview

Required Subscription: Event Lead Capture

The Activities tab on your Salesforce integration lets Popl write activity records into Salesforce, in addition to lead and contact records. Three actions in Popl can each create their own Salesforce activity:

  • A lead capture creates an Event.

  • A follow-up email creates a logged Email.

  • A confirmed booked meeting creates an open Task.

Each activity is dated and owned by the rep involved. This means a conversation at your booth appears on the record and in your activity history, even when someone else owns that lead.

Settings are saved per Salesforce connection, the same way Campaign and Primary Sync Object are saved on the Sync Settings tab. All three activity types are off until you turn them on.

Before You Start

Requirement

Details

Admin access

Full Team Admin access, or Subteam Admin access on a connection assigned to your subteam. Only a Full Team Admin can change a connection assigned at the full team level.

Salesforce integration

Salesforce must already be connected in Popl.

Salesforce permissions

The Salesforce user who connected the integration needs Create permission on Task, Event, and EmailMessage, plus access to the fields Popl writes. See the Salesforce Permissions section below. If you connected Salesforce as a System Administrator, you already have this.

Enhanced Email

Required only for logging follow-up emails. This setting must be turned on in your Salesforce org.


How It Works

Behavior

What It Means

Every activity type is off by default

Nothing writes to Salesforce until you check a Sync box and save. Each type is independent, so you can turn on one and leave the others off.

Settings are per connection

If you have more than one Salesforce connection, each one has its own Activities settings.

Activities are never backfilled

Your settings apply only to leads captured, emails sent, and meetings confirmed after you save. Past activity is not added.

The activity owner is the rep

Popl matches the Popl lead owner to a Salesforce user and sets them as the activity owner. The owner on the Lead or Contact itself is never changed.

One capture creates one Event

Re-syncing or editing the same Popl lead does not create a second Event. If two reps capture the same person, that counts as two Popl leads, so it creates two Events.

Notes keep working

Activities run alongside your Create Notes setting. Leaving both on gives you a note and an activity.

A failed activity never stops the lead sync

If Salesforce rejects an activity, the lead still syncs. The failure appears in your integration sync log along with the Salesforce error.

What Each Activity Type Writes

Popl Action

Salesforce Activity

When It Is Created

Lead captured

Event

A rep captures a lead, and it syncs to Salesforce. This includes Badge Scan, API Badge Kit, business card scan, manual entry on mobile or the dashboard, and Lead Capture Forms.

Follow-up email sent

Email

Popl actually sends the follow-up email. A bounced, suppressed, or scheduled but unsent email creates nothing.

Meeting booked

Task

A rep confirms in the Popl mobile app that they booked a meeting. Meetings booked outside of Popl create nothing.

Note: The Event is dated to the moment the lead was captured, in the capturing rep's local time, and lasts 15 minutes. The Task is dated to the day the rep confirms the booking, not the date of the meeting itself.


Setting Up Activity Logging

  1. In Popl, go to your Salesforce integration and open the Activities tab. It is the last tab, after Campaign Member.

  2. For each activity type you want to log, check the box in the SYNC column.

  3. Set the SUBJECT for that row. This is the subject line shown on the activity in Salesforce. See Choosing a Subject below.

  4. Click Save. The button stays disabled until you make a change.

If you leave the page with unsaved changes, Popl asks whether you want to save first.

Choosing a Subject

The Subject field is a searchable text field, not a fixed dropdown. You can type any value up to 255 characters, and it writes to Salesforce even if that value does not exist in your org's Subject picklist. For example, "Dreamforce 2026" or "Met at booth" works without any setup in Salesforce.

  1. Click the Subject field for the row.

  2. Start typing. The first option is always Use "[what you typed]".

  3. Your org's existing Subject values appear below as suggestions. Select one if you prefer to use an existing value

Activity Type

Default Subject

Lead captured (Event)

Meeting, if your org has it. Otherwise, the first value in your list.

Meeting booked (Task)

Call

Follow-up email sent (Email)

Not editable. The field reads From email subject because Popl uses the real subject line of the email it sent.

You can set a Subject before turning a row on. The value is only used once that row's Sync box is checked.

If Popl cannot read your org's Subject values, the field shows No Subject Found. You can still type a value, and nothing is blocked.


What Your Reps See

Nothing changes in the dashboard for non-admin reps. The only change is in the mobile app, and it controls the Task activity type.

  1. On a lead, the rep taps Book meeting in the top bar and shares their booking link.

  2. When they return to Popl, a prompt asks Did you book a meeting?

  3. Tapping Yes, meeting booked marks the meeting on the Popl lead and, if Task logging is on, creates the Salesforce Task.

  4. Tapping Not yet creates nothing.

Note: No confirmation means no Task. If reps do not tap Yes, meeting booked, Task logging stays on, but nothing is created. We recommend letting your team know about this step before your next event.

The prompt does not appear again on a lead already marked as booked, so sharing the link again never creates a second Task. If a rep confirms while offline, the Task is created once their phone reconnects.


Salesforce Permissions

These permissions are set in your Salesforce org, on the profile of the user who connected the integration.

Salesforce Object

Required Access

Event

Create, plus field-level access to Subject, Description, StartDateTime, EndDateTime, WhoId, WhatId, and OwnerId

Task

Create, plus field-level access to Subject, ActivityDate, WhoId, WhatId, OwnerId, and Status

EmailMessage

Create, plus Enhanced Email enabled on the org

Lead and Contact

Create, Read, and Edit (already required by the integration)

Some Salesforce configurations block activities regardless of permissions. These include required custom fields on Task or Event, validation rules, Apex triggers or flows on activity objects, and record types that require a specific record type.

Each of these appears in the sync log with the Salesforce error.


What to Expect

After you save, capture a test lead using Test Flow, then open the matching Lead or Contact in Salesforce. The Event appears in the activity timeline with your Subject, dated to the capture, and owned by the rep who captured it.

The following are expected behaviors:

What You See

Why It Happens

The owner on the Lead or Contact did not change

Popl never overwrites the record owner. The rep's name appears on the activity instead.

The same person has two Events

They were captured at two different events. Each Event has its own date and owner.

A Task is dated earlier than the meeting

Tasks are dated to the day the rep confirmed the booking, not the meeting date.

A Task appeared later than expected

If the lead had not reached Salesforce yet when the rep confirmed, the Task is created on that lead's next successful sync.


Troubleshooting

Issue

What to Do

I do not see an Activities tab

The tab only appears on a connected Salesforce integration, and only for admins. Subteam Admins see it only on connections assigned to their subteam.

Save is greyed out

No changes have been made yet. Check a Sync box or change a Subject to enable it.

Leads are syncing, but no activities are created

Confirm the row's Sync box is checked and saved, and that the leads were captured after you saved. Activities are never backfilled.

The sync log shows a permission error on Event or Task

The integration user's Salesforce profile is missing Create access on that object, or access to one of its fields. See Salesforce Permissions above.

Events are logging, but emails are not

EmailMessage has the strictest requirements of the three. Confirm Enhanced Email is turned on in your org and that the integration user has Create access on EmailMessage.

The sync log shows a validation rule error

A rule in your Salesforce org is rejecting the activity, often one that restricts Subject or requires a custom field. The rule's message appears in the log. Adjust the rule, or change the Subject to a value the rule accepts.

An activity was created with the integration user as owner

The rep did not match an active Salesforce user, so Salesforce assigned the integration user instead. This is recorded in the sync log.

A rep booked a meeting, but no Task appeared

Confirm the rep tapped Yes, meeting booked on the prompt. Meetings booked outside of Popl, or dismissed with Not yet, do not create a Task.


FAQ

Question

Answer

Does this replace the notes Popl writes today?

No. Create Notes works the same as before, and you can keep both on.

Can I use a Subject that is not in my Salesforce picklist?

Yes. The field accepts any text up to 255 characters. Only a validation rule in your org that restricts Subject can reject it.

Why can I not set a Subject for emails?

It is set automatically. A logged email always uses the real subject line of the message Popl sent.

Who is the Task assigned to?

The Popl lead owner. If one rep books a meeting on a teammate's lead, the Task goes to the lead owner.

Is the Task open or completed?

Open, so it appears in the assignee's task list and can be worked.

Will these activities appear on the record?

Yes. They appear on the Lead or Contact's activity timeline.

Does this work with HubSpot or another CRM?

Not at this time. Activity logging is available for Salesforce only.

Can I edit or delete an activity from Popl after it is created?

No. Once created, the activity lives in Salesforce and is managed there.

Do leads imported into an event create activities?

No. Imported leads follow the existing import sync behavior.

Does the confirmation prompt mention Salesforce to my reps?

No. It only asks whether a meeting was booked, and it looks the same whether or not a CRM is connected.


💡 Tip

Need more help? Get support from our team

Chat with us or email us at [email protected]

Did this answer your question?